tag:blogger.com,1999:blog-1839972800030307020.post8291797240178127308..comments2023-11-21T06:03:40.275-08:00Comments on Simply Easy DIY: DIY Clamp Rack - Wall Mounted Swing Out DesignUnknownnoreply@blogger.comBlogger2125tag:blogger.com,1999:blog-1839972800030307020.post-7337601620112741312016-04-15T11:49:26.639-07:002016-04-15T11:49:26.639-07:00I have taken the liberty of addressing the use of ...I have taken the liberty of addressing the use of pocket holes for this project above in the post. Not specifically for you but for anyone else who may be curious.Stan Sullivanhttps://www.blogger.com/profile/11677130592860909865noreply@blogger.comtag:blogger.com,1999:blog-1839972800030307020.post-66427793540403138212016-04-14T17:57:37.434-07:002016-04-14T17:57:37.434-07:00I like this design.
But as I will be using pallet ...I like this design.<br />But as I will be using pallet wood and recycled Shipping crates (All oak), I won't be needing the Rabbits. I prefer to use Pocket Hole screws and glue for all the joints. The only wood I will be buying is the Dowel.<br />As I do not have a workshop per-say, I am working on plans to build a shop when the ground dries out and Temps are a little higher. I will be using the same Pallet and Crate wood for that build too! I do not want to have to get a building permit for this job, So the walls need to be less then 12 FT long. So the length of the shop will be 11 FT. 6 Inches on all 4 sides.Anonymoushttps://www.blogger.com/profile/16521535943830916981noreply@blogger.com